Buy/More Info

This BLFP200C projector lamp is a replacement lamp for the Optoma Technology HD70 Multimedia projector.

User Ratings and Reviews

4 Stars So far, so good
I have less than 100 hours on this new bulb, so I can’t comment on bulb life. My largest quibble is with the bulb’s location on the projector in that I had to take it down from the ceiling and remove the mount to replace the bulb. Also, there were no installation instructions included, so I had to find the owners manual. And these bulbs are still too expensive. But the picture from the revitalized HD70 makes it all worth while.

5 Stars Bulb lasted 150% advertised life
I know, it’s expensive (read the other review). I thought the same thing. But you did check the bulb prices before you bought the projector, right?

Right?

Anyway, because of my previous experience with an Acer projector, I expected this bulb to last in the area of 750 hours (it’s advertised at 2000). To my pleasant surprise, my first bulb went to 2970 before dying.

Just make sure, when you replace the bulb, that you carefully clear out any dust from the inside of the case; if your screen is flashing green, your color wheel is probably gummed up. It took me forever to figure that out.

Anyhow, your choice is between this bulb at about $250 for 2000+ hours, or some other crappy bulb for $180 at < 1000 hours. You do the math.

Buy/More Info

This universal ceiling mount has a discreet, low-profile design allowing fast and easy installation for your projector. Includes quick-release for easy projector removal and maintenance; only four adjustment points to align independently for roll, pitch and yaw; Armor Lock secured connection points and easy cord management via the access opening. Ships standard with a flush mount and includes hardware for installation to wood joist or concrete. Pitch: +5?/ -20?, Roll: ? 10?, Yaw: 360? when used with extension arm (30? swivel when flush mounted); made of aluminum alloy with a black finish.This product is designed for the following systems:InFocus: LP 240, LP250, LP340, LP340B, LP350, LP500, LP530, LP540, LP600, LP640, LP650, LP690, LP790, LP790HB, LP815, LP820, SP110, SP-4800, SP-4805, SP5000, SP-5700, SP-7200, SP-7205, SP-7210, X1, X1A, X2, X3;Proxima: DP2000s, DP2000x, DP6150, DP6155, DP6500x, DP8000, DP8000HB, DP8200;ASKProxima: C40, C50, C100, C105, C109, C110, C160, C170, C180, C200, C300, C300HB, C410, C420.For a complete compatibility list please refer to the original manufacturer’s web site.

User Ratings and Reviews

5 Stars Sturdy Projector bracket
Very sturdy bracket. Easy to install, but heavy. Can mount on a 2×4 rafter, but should predrill mounting holes. Has good adjustments for angle and length.

4 Stars good product
relatively simple to install, with fairly clear instructions – the only issue really is that if you want to install it on anything except the direct mount (for example, suspended ceiling, or at an offset from the ceiling) you have to buy extra components which aren’t necessarily easy to track down. Once up it is solid and stable.

Buy/More Info

Peerless’ PRG Precision Gear Projector Mount is simplifying the way image alignment is done. The patent-pending precision gear design allows exact tilt and roll image positioning by either simply turning two adjustment knobs with a Phillips screw driver, or use the tool-less option by extending the knobs to adjust by hand. Just set the precision gear to the desired position to secure it in place – it will hold its position even during projector maintenance. With Peerless’ PRG Precision Gear Projector Mount, just set it and forget it. No more adjustment screws. No more micro adjustments. No more hassles.

User Ratings and Reviews

5 Stars Superior Projector Mount
As an A/V installer I’ve used several different makes and models of projector mounts; but none has the flexibility of this precision geared mount.

5 Stars Get this mount!
If you have a large projector like the Panasonic PT-AE3000U, this is the ceiling mount for you. I had my projector mounted in less than an hour. Instructions are straight-forward and easy to follow. If you are investing 2500.00 in a projector as I did, don’t skimp on the mount.

5 Stars Love it
Easy to use and install. The gears are well worth the extra investment, save tons of time later adjusting the image!

Buy/More Info

The AccuScreen Manual Screen is a sleek and attractive addition to your home theater. The steel case and durable plastic end caps are finished in an attractive Euro-White. The sturdy design of the Universal Mounting Brackets on each end cap allow for either wall or ceiling installation.All AccuScreen Manual screens are manufactured with the BalanceView viewing surface, providing the optimum in viewing pleasure. Brilliant colors and outstanding contrast capabilities bring out the best in your Home Theater projector! With sizes from 7′ diagonal NTSC to an astounding 119″ HDTV, your Theater will have a beautiful image, larger than any flat screen TV available! As an added bonus, all AccuScreen Manual Screens have black leader above the image area, allowing you the flexibility to position your screen where you want it, above and away from a beautiful image.

User Ratings and Reviews

3 Stars 10′ NTSC Accuscreen
This screen is an excellent buy for the money. Un rolled, the screen is perfectly flat, and offers exceptional reflectance. Its only challenge is in rolling up the screen. My installation uses chains from the ceiling, so the case in which the screen retracts moves when the screen is retracted. That movement causes the pawls to catch impeding the roll up. It may take 5 to 8 tries to roll up the screen. If you have the patience, this screen is an excellent value.

5 Stars Excellent!!!!
Exceptional price, product and shipping. It was at my door before I had a chance to look online and see if it shipped!!! Would definitely recommend this seller and this product.

4 Stars A ten for the screen
!0×10 this screen gets a 10 in my book! It is excellent, hangs on the wall, springs up for quick storage, great picture easy to hang and fun to use overall hell of an investment!

Buy/More Info

Sony’s worldwide reputation for creating unique, attractive, high-quality, advanced technology products rests on a long line of innovations embraced by people from all walks of life. With a diverse product lineup serving a variety of lifestyles and industries, Sony continuously strives to introduce new products and technologies to meet changing market needs.

Buy/More Info

This mount is VideoSecu brand. Please report to Amazon.com if you recieve a mount without VideoSecu logo. Universal mount features a flexible mounting system that can be used with most projector model, and it has the versatility to attach to nearly any ceilingl. The mounting interface features four double-jointed support arms that allow flexible positioning to reach almost any mounting point of the projector. Each arm can be precisely positioned to avoid covering important projector ventilation and access points used for lamp and air filter replacement. This minimizes heat build-up and maximizes lamp life. Its robust construction allows the mount to positively hold the projector fixed at nearly any angle. This universal mount’s tilt and roll can be adjusted independently of one another, compared to the clumsier adjustments needed for ball-and-socket mounts. it comes with an adjustable channel and ceiling plate. This allows the projector to be mounted at an adjustable height from the ceiling. This auction is for 1 set of White projector ceiling mount. Does this mount fit my projector? Please look at the mounting screws on the top of your projector. Measure the distance between the holes. If your projector has 3 holes pattern or 4 hole pattern, and the maxim distance between any two holes is less than 12.5 inch/32 cm, then this mount will fit your projector.

User Ratings and Reviews

1 Star Don’t buy this
You get what you pay for, and sometimes not even that!! I was replacing my Atdec flush mount, because I needed to lower the projector about 12 inches, and man is there a difference in engineering! First off the lateral twist adjustment is worthless to unusable. There are 2 inaccessible screws to make this adjustment or you can rotate the ceiling mount plate about 15 degrees. The Ceiling mount is worthless for mounting in a single 2×8 ceiling stud because they designed it with 4 holes that are stupidly 3 inches apart. This wouldn’t even work for a double stud! I mounted mine diagonal using only 2 of the holes. There are 4 machine screws to hold the extension to the ceiling plate and four more to hold the projector mount to the extension but only ONE LOUSY SCREW for a friction plate that keeps the whole thing from crashing down!!!! In fact while I was adjusting everything (without the projector thank God), a tightened a screw that changed the shape of the extension and the friction set screw popped loose and the whole assembly hit the floor leaving me wondering how I was going to make sure that didn’t happen with my projector. I decided to drill a hole through the two parts of the extension and put a screw through it to prevent the two parts from pulling apart. – Believe it or not there is more but you get the idea.

5 Stars Great universal mount
I bought this mount to be used in a church, Also had a projector that needed a special mount for very close 4 hole mount. This mount was just what the Dr. ordered. Mounts to normal studs just fine, if you turn it the right way… Fixing to order a second one for a rear mount projector to our church.

5 Stars You get MORE for your money with this one!
I bought this mount after reading the reviews and was a little edgy about it because of the “one star” review i read that said it might just drop from the ceiling…Well before i hung my projector from it I ACTUALLY GRABBED ONTO IT AND HUNG WITH THE FULL 140LBS OF MY BODY WEIGHT AND IT SLIPPED ABOUT 1/4″ AND THEN CAUGHT. I noticed that if you turn the sliding height adjustment bar upside down it will slip off SO MAKE SURE YOU PUT THAT BAR ON THE RIGHT WAY (try it both ways, the right one will be obvious) If you install it correctly you REALLY CANT BEAT THIS FOR THE MONEY. It is a must that you be somewhat mechanically inclined..if your unsure, have a friend on hand for second opinions and to help you hold everything steady. Once its up its easy to make adjustments and it looks sweet!

Buy/More Info

Da-Lite’s wide selection of tripod and wall screens gives the presenter a professional solution for any projection application or situation. All screens incorporate Da-Lite’s exclusive Camlok roller system that prevents the screen from being accidentally pulled from the roller. All screens come with black masking borders as standard.Model B is perfect for classroom and meeting room facilities. Its easy pull-down system locks at intervals to fit a variety of projection formats. Nylon bearings provide smooth quiet operation for the life of the screen. Case design allows for hanging from a ceiling or flush mounting to a wall.

User Ratings and Reviews

5 Stars Simply Great!!!
Just what I was looking for to have in my personal home-theater at home… easy to hang, very good size (even adjustable), and a very good price…

1 Star It is not as advertised
Disappointed and would not recommend to anyone.

5 Stars Great screen for the price
What a wonderful improvement this screen makes over the bed sheet I had pinned to my curtain rods, and for only $114! This screen arrived in just a few days and included free shipping. It is exactly as described in the specs, and works great with my projector. I might have gone for a gray screen had I known it would look better with some ambient light. Overall I’m very happy with my purchase.

Buy/More Info

WHILE I SHOULD BE FLATTERED THAT ANOTHER SELLER IS USING PICTURES OR OUR MOUNTS TO SELL THEIRS, IT IS REALLY NOT FAIR TO THE CONSUMER OR US. If it looks like our projector mounts but doesn’t say “Projector-Gear” in the title, it is not a REAL Projector-Gear mount. We are proudly the highest rated and most sucessful projector mount seller on ebay: Kramerica_incorporated, and have a 100% rating with over 18,000 feedback! We have been at the top for years and had lots of people trying to copy our designs, but this is the first time we had another seller actually use our mounts in their pictures. I can’t blame them though. Our mounts look MUCH NICER! Plus our mounts can adjust all the way up to +/-40? from side to side and tilting up and down. That is 25% more adjustability than the imitation mounts. Our Projector-Gear mounts are constructed using precision, custom designed, aluminum parts. If it does not say “Projector-Gear” in the title of the ad, it is NOT a real Projector-Gear projector mount. Our mounts are proudly designed and manufactured in the USA by Projector-Gear, LLC — Beware Of Cheap Imitations. WE OFFER AN EXCLUSIVE MOUNT UPGRADE PROGRAM. When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, upgrade your mount for only $14.99 + shipping and handling. Just purchase a new base plate online and it will ship within 24 hours via 2-3 day priority mail. Unlike so-called “FREE” exchange programs, you won’t have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.

Buy/More Info

WHILE I SHOULD BE FLATTERED THAT ANOTHER SELLER IS USING PICTURES OR OUR MOUNTS TO SELL THEIRS, IT IS REALLY NOT FAIR TO THE CONSUMER OR US. If it looks like our projector mounts but doesn’t say “Projector-Gear” in the title, it is not a REAL Projector-Gear mount. We are proudly the highest rated and most sucessful projector mount seller on ebay: Kramerica_incorporated, and have a 100% rating with over 18,000 feedback! We have been at the top for years and had lots of people trying to copy our designs, but this is the first time we had another seller actually use our mounts in their pictures. I can’t blame them though. Our mounts look MUCH NICER! Plus our mounts can adjust all the way up to +/-40? from side to side and tilting up and down. That is 25% more adjustability than the imitation mounts. Our Projector-Gear mounts are constructed using precision, custom designed, aluminum parts. If it does not say “Projector-Gear” in the title of the ad, it is NOT a real Projector-Gear projector mount. Our mounts are proudly designed and manufactured in the USA by Projector-Gear, LLC — Beware Of Cheap Imitations. WE OFFER AN EXCLUSIVE MOUNT UPGRADE PROGRAM. When you buy a new projector, you will never need to pay full price for a projector mount again. When you get a new projector, upgrade your mount for only $14.99 + shipping and handling. Just purchase a new base plate online and it will ship within 24 hours via 2-3 day priority mail. Unlike so-called “FREE” exchange programs, you won’t have to UNINSTALL your old mount, PAY to ship it back, WAIT and then PAY to have the replacement shipped. Ask us for more details. 90 Day Money Back Guarantee.

Buy/More Info